Any Questions?
Feel Free to Email Us at
Orders@brewgadgets.com
|
| Airlocks |
| The air lock is a critical tool for making homemade wine and homebrew. These simple devices protect fermenting and aging wine from infection while allowing carbon dioxide gas to freely escape the fermentation vessel. |
Double Bubble  |
The S-Lock fits all stoppers, at times we have found that they do not always fit snuggly in the grommets of buckets. You can purchase smaller grommets for bucket lids on this site. However, we still find this airlock to be the easiest to use. | $0.99 |
Three Piece Airlock
 |
The Three Piece Airlock disassembles, to make cleaning easy. It fits all stoppers and buckets. | $0.99 |
| Carboy Accessories |
The Brew Hauler
 |
Possibly the best carboy carrier on the market, it is the ultimate gadget to haul your brew! The Brew Hauler is made of heavy-duty polypropylene straps that cradle a carboy and provide two carrying handles. The straps adjust to fit carboys from 5 to 7 gallons in size and is rated to lift 100 lbs. This carrier makes lifting both safe and convenient! |
$12.49 |
The Brew Belt |
This simple device is a plastic coated wire heating element, which forms a kind of lasso which can be drawn tightly around the fermenting vessel. Simply slip the belt over the bucket or carboy and plug it in. Although the Brew Belt is not thermostatically controlled, the temperature of the brew can be altered by adjusting the height at which the Brew Belt sits around the fermenting vessel. The lower the belt, the more heat will be supplied into the fermenting liquid. It is quite safe and can be left for several days until the fermentation process is complete. Then simply loosen off the belt, remove and it is ready for next time. |
$19.69 |
Carboy Handle for 3 - 6 gallon Carboys  |
Assembles to carboy neck for easy carrying. | $5.99 |
| Carboy Handle for 6.5 and 7
Gallon Carboys |
Assembles to carboy neck for easy carrying. | $6.29 |
Adhesive Fermenting Thermometer
 |
Conveniently attaches to the exterior of buckets & carboys, it has a range of 36°-78°F, accurate to 1°F.
|
$2.39 |
| Stoppers |
| Rubber Gum Stoppers
|
#6.5 Gum Stoppers will fit 1 gallon Jugs, 3 gallon glass carboys, 5 gallon glass carboys, and 6 gallon glass carboys #7 and #7.5 Gum Stoppers will fit 6.5 gallon carboys #10 Gum Stoppers will fit all of the P.E.T Carboys |
#6.5 Solid No Hole $0.69 #6.5 Drilled $0.69 #7 Drilled $0.69 #7.5 Drilled $0.99 #8 Drilled $1.19 #8.5 Drilled $1.39 #9.5 Drilled $1.49 #10 Drilled $1.59 |
Buon Vino Small Stopper  |
This is one of the best inventions for home wine and beer making to come along in many years. Fits 3, 5, 6, 6.5 gallon Carboys and when you turn it over it fits most bottles. It will last longer than rubber stoppers and will not discolor. | $0.79 |
Buon Vino Large Stopper  |
This is one of the best inventions for home wine and beer making to come along in many years. Fits the 14.25 gallon (54 liter) Demi John. It will last longer than rubber stoppers and will not discolor. | $1.99 |
50 mm Rubber Carboy Cap
 |
Red 50 mm Rubber Carboy Cap with single airlock hole. Fits 5, 6, 6.5 and 7 gallon carboys. | $2.39 |
| Plastic Vessels |
Pail Opener Tool |
This handy tool makes removing the lids from pails easy. | $5.49 |
| 6.5 Gallon Bucket Replacement Lid  |
What makes our buckets better? Our buckets are sealed around the exterior rim with a rubber gasket. This ensures a tight fit and keeps contaminates out. Also, the lid has a grommet in the airlock hole which seals when the airlock is placed in the hole. | $2.29 |
| 6.5 Gallon Bucket Complete with Drilled and Grommetted Lid
 |
Fermentation vessels must be made of food grade materials. The most important characteristics of a plastic fermenter is that it has a very smooth interior. Any scratches will provide a hiding place for bacteria which will ruin your beer or wine. Plastic pails provide the necessary head space to accommodate foaming and capacity to hold large volumes of fresh fruit. A 6.5 gallon bucket can accommodate 5 gallons of beer or wine during a primary. Another reason buckets make a good primary fermentation vessel, is that the primary fermentation creates the most residue on the vessel, and they are easier to clean than carboys because you can remove the lid. Most homebrewers use plastic pails for primary fermentation and use glass for secondary fermentation. | $12.19 |
6.5 Gallon Bottling Bucket
| Same Bucket as above execpt it is drilled for a spigot which is included. No lid included but this bucket uses same lid as 6.5 gallon fermenter.
Bottling Spigot: Spout fits in neck of bottles, w/ 1 gasket, fits 5/16” and 3/8” tubing. Improved design - tubing doesn't turn when handle turns | $13.99 |
| 7.8 Gallon Bucket Replacement Lid  |
What makes our buckets better? Our buckets are sealed around the exterior rim with a rubber gasket this ensures a tight fit and keeps contaminates out. Also the lid has a grommet in the airlock hole to better seal when the airlock is placed in the hole. | $6.49 |
| 7.8 Gallon Fermenting Bucket Complete with Lid  |
Fermentation vessels must be made of food grade materials. The most important characteristics of a plastic fermenter is that it has a very smooth interior. Any scratches will provide a hiding place for bacteria which will ruin your beer or wine. Plastic pails provide the necessary head space to accommodate foaming and capacity to hold large volumes of beer wort of fresh fruit. A 7.8 gallon bucket can accommodate 6 gallons of beer or wine during a primary. Another reason buckets make a good primary fermentation vessel, is that the primary fermentation creates the most residue on the vessel, and they are easier to clean than carboys because you can remove the lid. Most homebrewers use plastic pails for primary fermentation and use glass for secondary fermentation. | $21.19 |
7.8 Gallon Bottling Bucket |
This is the same bucket as above execpt it is drilled for a spigot which is included. No lid included but uses same lid as 7.8 gallon fermenter.
The Bottling Spigot
Spout fits in neck of bottles, w/ 1 gasket, fits 5/16” and 3/8” tubing. Improved design - tubing doesn't turn when handle turns
|
$21.19 |
Bottling Spigot
| Spout fits in neck of bottles, w/ 1 gasket, fits 5/16” and 3/8” tubing. Improved design - tubing doesn't turn when handle turns | $2.79 |
Fast Flow Bottling Spigot
| Fits 7/16” and 1/2” tubing. Excellent valve design. Single gasket goes on outside of bucket |
$2.99 |
Easy-On/Off Spigot
 |
Easy on/off bottling spigot with a locking handle. Fits a 1 inch drilled hole. Comes with a nut and thick gasket and will accomodate a 1/2 inch siphon hose or 1/2 inch bottle filler. Features a locking handle to allow the user hands-free operation. Can be disassembled for easy cleaning. |
$4.69 |
Replacement Grommets for Bucket Lids |
If you have lost your grommet to your lid all is not lost. The lids come with a large grommet for a three peice airlock. There are two sizes available: Small fits the Double Bubble and Tripple Ripple Airlocks. Large fits the Three Piece Airlocks. |
$0.30
|
| Glass Vessels |
There is now only one source in the world for glass carboys and it is Italy. Pricing has taken a huge jump in part of the high energy costs of producing glass and the high costs of freight from Italy. |
1 Gallon Glass Jug  |
These jugs are great for bringing your kegged homebrew to friends to share. Extra Screw caps are available. You can also use it for small batches of homemade wine. Includes One Screw Cap |
$4.99 |
||||||||||
3 Gallon Glass Carboy  |
The 3 gallon carboy makes a great fermentation vessel for smaller homemade wine recipes. | $25.49 |
||||||||||
| 5 Gallon Glass Carboy |
Glass carboys are the best choice for secondary fermentation and some primary fermentation. It has less chance of contamination than plastic because it is harder to scratch. Scratches can harbor bacteria and cause infections. Glass is easy to sanitize and will last a life time if cared for. Never add hot wort to a glass carboy. The high temperature may cause the glass to expand quickly and break. A 5 gallon carboy makes a great secondary fermentation vessel for most home brew recipes as most homebrewers brew 5 gallon batches of beer. | $33.99 |
||||||||||
6 Gallon Glass Carboy  |
Glass carboys are the best choice for secondary fermentation and some primary fermentation. It has less chance of contamination than plastic because it is harder to scratch. Scratches can harbor bacteria and cause infections. Glass is easy to sanitize and will last a life time if cared for. Never add hot wort to a glass carboy. The high temperature may cause the glass to expand quickly and break. The 6 gallon carboy makes a great secondary fermentation vessel for wine kits, as they usually make 6 gallons of wine, or any beer recipe which makes 6 gallons of beer. | $38.39 |
||||||||||
| 6.5 Gallon Glass Carboy |
Want to see your wort or must ferment during primary fermentation. Wow! What an amazing thing it is to see the yeast working so hard to make your beer or wine. Glass is the best and most affordable vessel for fermentation for the home brewer or wine maker it has less chance of contamination than plastic because it is harder to scratch. Scratches can harbor bacteria and cause infections. Glass is easy to sanitize and will last a life time if cared for. Never add hot wort to a glass carboy. The high temperature may cause the glass to expand quickly and break. A 6.5 Gallon carboy is a perfect primary fermentation vessel for 5 gallons of beer wort or wine must. | $39.39 |
||||||||||
14 ¼ Gallon Demi John  |
In plastic casing, takes Large Buon Vino Stopper, #28 tapered cork, or #11 stopper. Special Order - Please Allow 1-2 Weeks for Delivery. One (1) In Stock For Immediate Delivery. |
$75.49 | ||||||||||
 |
The Ultimate One-stage Fermenter!
Reduce the time spent on one batch by The V-Vessel System Retail kit comes complete with the V-Vessel unit, a collection capsule, wall bracket & mounting assembly, rubber bung & airlock, hose adapter & 6 feet of tubing with a hose clamp and a large splash free funnel. Everything you need to get started is included in the kit. |
$179.99 |
||||||||||
| Conical Stainless Steel Fermenters | Conical with welded on legs and 1/2" MPT nipple, flat stainless steel lid, lid gasket, rotating racking arm, and a 1/2" full port ball valve. Please allow 3-4 weeks for delivery |
7.1 Gallon $510.00 12.2 Gallon $529.00 24 Gallon $889.00 |
||||||||||
Lakeview Jaycees
